![]() ![]() "Voltage Regulators with multiple outputs" If such ICs exist then what is the IC classified as (like 7805 is a linear voltage regulator). Yes, certainly – but they won't get easier than using two linear regulators – the amount of external components (in this case, only in- and output capacitors) cannot be reduced. Testing under load with a multimeter is the most accurate way to test a power supply for issues.Is there any IC that takes in 12 V and spits out 2 or more voltage levels like 3.3 V, 5 V, 9 V etc? These readings are taken at an idle state, and may not indicate a more severe issue that occurs when the system is under load. 1v, or more often than every 10 seconds could be an indication of an issue with the 12v rail, and you should consider having your power supply tested or replaced. 1v can be safe as long as it happens no more than once every 1-2 minutes. ![]() 05v is generally fine as long as it happens no more than once every 10-15 seconds. It should be stable, with little to no fluctuations. The 12v rail should read between 11.4v and 12.6v. Otherwise, go to Home and find the voltage readings on the right side. ![]() If you see a "M.I.T" option select it and go to PC Health Status. At the bottom is the System/3.3v, System/5v and System/12v readings.įrom Advanced mode, go to H/W Monitor, scroll to the bottom and find the voltage readings. Previous revisions may vary.Įnter Advanced mode, on the right hand side is Hardware Monitor, at the bottom is the voltage readings.Įnter Advanced mode and click on Hardware Monitor on the middle right side. Below are a list of common locations for this utility: Many motherboard manufacturers provide a voltage monitor as a feature in their BIOS. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |